///////////////////////////////////////////////////////////////////////////

    - StarPRNT Intelligence Ver 2.1 for BSC10 Windows -
        FirmwareInfo file                                    07/25/2014

   Copyright (C) 2014 Star Micronics Co., Ltd. All rights reserved.
///////////////////////////////////////////////////////////////////////////
* This file shows firmware version which is required by StarPRNT Intelligence 
  for BSC10 Version 2.1 and limitation with using old firmware.


[Required printer firmware version]
  The firmware version which is required by StarPRNT Intelligence for BSC10
  Version2.1 is as follows.

     - BSC10    (V1.3 or later)

[limitation with using old firmware]

1. [Printer Utility - TextSearch]
  1-1.
    'Logo before cut' function do not work following versions.
     Even select that function, printer works as 'Logo' function.
  
     - BSC10    (older than V1.2)

2. [Printer Utility - LogoStore]
  2-1.
    'Stored Logo Size[KB]' do not diaplay following versions.
   
     - BSC10    (older than V1.2)

  2-2.
     When you run LogoStore function, it takes several tens of seconds to load the data following versions.

     - BSC10    (older than V1.2)

  2-3.
     If the number of registered logo data exceeds 40, the more than 40 logo is not displayed
     in the list, cannot print and cannot delete following versions.
     
     
     - BSC10    (older than V1.2)

3. [Printer Utility - Printer Settings]
  3-1.
    'Font Width Reduction','Vertical Length Reduction' and 'Ladder Barcode Adjustment' 
    function do not work following versions.
    Even set that function, printer settings are not enabled.
 
     - BSC10    (older than V1.2)
